Hi, i bought one weak ago the PSOC 4M - CY8CKIT-044, and i have a trouble with the LCD and other functions like the PWM, in 5V, and the system is configure to work in 5V, software and hardware, in 3.3V i doesn't have any problem all the functions works fine, only in 5V the PSOC start to work with some problems, and one change i made to the board is change the current measurement jumper J14, to 1-2 and the PSOC (default is in 3-4)
work fine but when i use the ADC to read a voltage measurement i have a big difference with the multi meter, like 0,3V, and when i back to 3.3V and the jumper in 3-4 the read is the same that the multi meter. another test i was doing is in 5V and the jumper in other configurations and all start to lock the PSOC.
So any have the same problem? or a solution.
Thanks
PD: sorry for my english, is no my language.
