Using the programmer in the CY8CKIT-049-41xx kit
Forums: PSoC 4 ArchitectureHi,I have several programming boards of the CY8CKIT-049-41xx (the programmer and the target board can be broken off). I have used up the CY8CKIT-049-41xx board but removed...
View ArticleClik here to view.
external clock for PSOC4
Forums: PSoC 4 ArchitectureI need to using an external crystal for better performance (40MHz TCXO).So I connect this with P5(1). Configure all the clock using external clock.But the system can't boot...
View ArticleUDB Counter values update
Forums: PSoC 4 ArchitectureHi Everyone,I am having trouble with a Counter, my program has an EEPROM memory from which it reads the values and updates the counter,I cant get the values to update.the...
View ArticlePSoC 4200M Family non-volatile variables
Forums: PSoC 4 ArchitectureDear all PSoC fans!I am currently working in a project where a PSoC 4, powered by a battery pack, collects sensor information and sends it via ZigBee to a Central Node that...
View ArticleClik here to view.
[solved] CY_ISR not working with freertos
Forums: PSoC 4 ArchitectureI'm currently trying to port freertos v9.0.0 to my CY8C4247LQI-BL483 (PSOC4 device). (Using with CY8CKIT-042-BLE Pioneer baseboard)I've got succeeded in making a simple led...
View ArticlePSOC 4 CY8CKIT-049-4xxx proto typing kit - UART_Bootloader.hex
Forums: PSoC 4 ArchitectureI am trying to write a bootloadable hello world program , but the UART_Bootloader.hex/ SCB_Bootloader.cywrk is missing in both Psoc Creator 3.3 version & 3.1 version...
View ArticleAbout BLE read callback
Forums: PSoC 4 ArchitectureI have customer server service, with one character as uint8[128].I want to implement as when the client request a read request, the server will fillin new values, then return...
View ArticleDisplay float value using sprintf not working
Forums: PSoC 4 ArchitectureHi,i would like to display the results of a division as a float using sprintf and display it using the UART communication component.My code is give below. float ft,db;char...
View ArticleClik here to view.
unable to programm Device
Forums: PSoC 4 ArchitectureHi folks,I've designed an PCB with an CY8C4245AZI-M433 on it. Sadly I'm not able to establish an connection between the miniprog and PSOC. What did I do wrong?Attachments:...
View ArticlePSoC4 half high level output?
Forums: PSoC 4 ArchitectureHi: I use Cy8C4124 as an I2C slave device. if master don't read anything after 30 secounds. CY8C4124 will go to stop mode.most times are fine but some times, i find all of...
View ArticleSelect Debug Target Blank for CY8CKIT-049-42xx
Forums: PSoC 4 ArchitectureWell, I installed all the tools for my CY8CKIT-049-42xx and built the project Breathing LED. All going well until the program step. Here I get a blank pop-up when trying to...
View Articleunable to programm device after set Debug interface to Gpio
Forums: PSoC 4 ArchitectureHello,I use the device Cy8C4013LQI.I must disable all components for power saving. So I followed the instruction to change the debug interface to from SWD to GPIO.Programming...
View ArticleHow to set low Power Modes on CY8C4013?
Forums: PSoC 4 ArchitectureHello, I tried a lot of different things, but nothing works really good. System-Resourcen 1 digital Input with pullup (used for WakeUp Key) 1 digital Output on 3.2 PWM mode...
View ArticleSPI UDB multi slave example
Forums: PSoC 4 ArchitectureHi all,Is there any SPI master ( UDB mode ) example codes that illustrates how to use multiple slaves with it ?
View ArticleProgramming of psoc-4
Forums: PSoC 4 Architecturehow can i program standalone psoc-4 IC???is that necessary to use HSSP method to program psoc-4??
View ArticleParticle sensor
Forums: PSoC 4 Architecture Hello , I'm working with sds011 particle sensor and our psoc4-049 but I'm not getting proper configuration. if someone working with a similar sensor , would be very...
View Articlevoltage Confugration
Forums: PSoC 4 Architecturemy internal confuguration of psoc-4 is on 3.3 volts and give 5 volts external supply than what happen??is it working perfect??
View ArticleQuick question about PSOC4 Arduino interface
Forums: PSoC 4 ArchitectureThis may sound like a dumb question, but I wanted to make sure since I have never used the Arduino interface standard.If I plug the CY8CKIT-026 kit board on top of the...
View ArticleKitprog from 059-dev kit with 1.8V or 3.3V?
Forums: PSoC 4 ArchitectureHello, bouht a 059-Kit to break off the Kit-Prog.But on the Pin VTarget comes 5V out.My project runs on 1.8V or 3.3V, but not on 5V. It´s a solution to use this Kitprog with...
View ArticleStrange clock behavior
Forums: PSoC 4 ArchitectureHiI have an external 24MHz crystal and the ECO is using this. In the configure system clocks window, Direct_Sel, PLL1_Sel and PLL0_Sel are all set to use ECO. HFCLK uses...
View Article